Prismatic Powders

Scutter Botch Step 1

Scutter Botch Step 2 over Scutter Botch Step 1 creates a bronze metallic. This color is a polyester two coat powder coat with a satin finish. Two Coat Information: To achieve this color as shown, Scutter Botch Step 2 PPB-10612 must be applied as a top coat. Semi-Gloss: 37-70 Gloss Units Step 2 must be applied as the topcoat to achieve proper two-step color results. If Step 1 is used independently, a clear topcoat is recommended for exterior use. Inconsistent mil thickness in either the basecoat or topcoat can result in uneven color. Apply both the basecoat and topcoat in accordance with the recommended mil thickness specifications. Allow the part to cool completely before applying the topcoat. Once the topcoat has been applied, fully cure it according to the topcoat’s recommended cure schedule. We strongly recommend spraying a test panel before starting your project, especially if you are using a topcoat or additional basecoats, primers, etc. This helps ensure the final color meets your specifications and allows you to anticipate any potential changes in color or finish. Notes: A clear top coat is recommended for exterior use. While a clear top coat may improve UV resistance and the overall durability of the finish, it can occasionally change the appearance of the color it is being applied over. We recommend spraying a test panel before applying it to your project to ensure the final color meets your specifications.

Manufacturer code: PMB-10611